Project

General

Profile

Final Project Ordering » History » Version 28

Gudjon Magnusson, 2012-10-22 10:29

1 1 Joseph Foley
h1. Final Project Ordering
2
3
Remember to specify if you are keeping the parts later or not.  RU will pay for some parts, but nothing expensive, especially if you are keeping it.  We can probably afford around $50 per group, roughly.  Make sure that you follow the template shown below or you may not get your parts ordered.  This list must be completed by Thursday Oct 18.
4
5 3 Joseph Foley
Try to order from the recommended vendors first.  If the thing you need is not there, then make sure you include shipping and tax in the cost information, e.g. 25Euro + 15Euro(ship) + 10Euro(tax).
6
7 1 Joseph Foley
h2. Groups
8
9 22 Joseph Foley
h3. Example
10 20 Joseph Foley
11 22 Joseph Foley
* Joe Foley and Bjorgvin Runarsson "Lab5 and Lab6 Supplies"
12 1 Joseph Foley
** Emails: foley@ru.is, bjorgvin09@ru.is
13 22 Joseph Foley
** RU is paying for it out of the class budget
14 24 Joseph Foley
** 15 of IR distance sensor includes cable (10cm-80cm)  - GP2Y0A21YK0F $13.95 each http://adafruit.com/products/164
15
*** We appear to have 8 of them in the equipment box, so we only need to order 7
16 2 Joseph Foley
17 20 Joseph Foley
h3. Projects
18
19 26 Elías Marel Þorsteinsson
* Axel Bender, Elías Marel and Ívar Kristinsson "Auto Targeting Nerf Turret"
20 4 Elías Marel Þorsteinsson
** Emails: axelb10@ru.is, elias10@ru.is, ivark10@ru.is
21
** We plan on keeping the robot, so we will pay for the materials later.
22 5 Elías Marel Þorsteinsson
** 1 of Pololu Qik 2s9v1 Dual Serial Motor Controller $24.95 http://www.pololu.com/catalog/product/1110
23 27 Elías Marel Þorsteinsson
** 5 of PIR motion sensor, ID:189 - $10.00 https://www.adafruit.com/products/189
24 28 Gudjon Magnusson
* Guðjón Einar, Ægir Örn, Jon Vilberg "Head-tracking camera mount"
25 12 Joseph Foley
** Emails: gudjonm11@ru.is, aegiri11@ru.is, jonvg09@ru.is
26 6 Gudjon Magnusson
** We plan on keeping the XBee modules and will pay for them
27 28 Gudjon Magnusson
** 1 of Stepper Motor - 68 oz.in (400 steps/rev) $16.95 https://www.sparkfun.com/products/10846
28 6 Gudjon Magnusson
** 2 of Standard servo - TowerPro SG-5010 - 5010 $12.00 https://www.adafruit.com/products/155
29 17 Gudjon Magnusson
** 1 of L3GD20 3-Axis Gyro Carrier with Voltage Regulator $24.95 http://www.pololu.com/catalog/product/2125
30 6 Gudjon Magnusson
** 1 of Rechargeable NiMH Battery Pack: 7.2 V, 2200 mAh, 3x2 AA Cells, JR Connector $17.29 http://www.pololu.com/catalog/product/2225
31
** 2 of XBee Pro 60mW Wire Antenna - Series 1(802.15.4) $37.95 https://www.sparkfun.com/products/8742
32 10 Árni Þorvaldsson
* Árni Þorvaldsson, Hannes Rúnar Herbertsson, Emil Már Einarsson, Brynjólfur Guðmundsson, Sæþór Ólafur Pétursson and Örn Bárður Arnarson  "Quadcopter"
33
** Emails: arnitho10@ru.is, hannesh08@ru.is, saethor10@ru.is, emil11@ru.is, orn10@ru.is, brynjolfur06@ru.is
34
** We will split into two groups and make each one quadcopter. 
35 25 Árni Þorvaldsson
** We have fundings from the University to pay for the material and will order it ourselves.
36 9 Árni Þorvaldsson
** 10x Motor AC2836-358, 880Kv $240.00 http://store.jdrones.com/AC2836_358_Motors_p/ac2836358.htm
37
** 10xArduCopter ESC 20 Amp (BACKORDER) $144 http://store.diydrones.com/ArduCopter_ESC_20_Amp_p/ac-0004-08.htm
38
** APC Propeller set, 11X47 SFP Style  $48 http://store.diydrones.com/APC_Propeller_set_11X47_SFP_Style_p/ac-0004-apc2.htm
39
** Full ArduPilot Mega 2 kit $300 http://store.diydrones.com/ArduPilot_Mega_kit_p/kt-apm-01.htm
40
** Optical Flow Sensor $79.98
41 8 Árni Þorvaldsson
** 2xTurnigy carbon frame 67.90  http://www.hobbyking.com/hobbyking/store/__22397__Turnigy_Talon_Carbon_Fiber_Quadcopter_Frame.html
42 13 Joseph Foley
** 2x Turnigy 2200mAh 3S 25C lipo pack $18  http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8934
43
* Sturla Rúnarsson "Locking system, Safe"
44
** sturla06@ru.is
45
** Need nothing
46 14 Joseph Foley
* Víðir Bjarkason and Arndís Magnúsdóttir "Motor driven car that hunts for light"
47
** vidirb07@ru.is, arndis10@ru.is
48
** Light sensors (from the lab)
49
** DC motors
50 1 Joseph Foley
** DC motor control (or transistor)
51
* Konráð Guðmundsson, Ingi Steinn Guðmundsson, Guðjón Ingi Gunnlaugsson and Gunnar Sigurðsson "Map Maker"
52
** konrad11@ru.is, ingi10@ru.is, gudjon11@ru.is and gunnar11@ru.is
53 23 Konráð Guðmundsson
** 3x Ultrasonic sensors for forward/right/left sides of the robot, used for mapping: Ultrasonic Range Finder - Maxbotix LV-EZ1 (https://www.sparkfun.com/products/639)
54
** 1x Network capability for the Arduino (Network Shield for wireless connect): Arduino Wi-Fi Shield (https://www.sparkfun.com/products/11287?)
55 20 Joseph Foley
* Gisli "Line following car"
56
** gisli??@ru.is
57
** Need nothing
58 14 Joseph Foley
59 2 Joseph Foley
h2. Recommended vendors
60
61
* http://www.adafruit.com
62
* http://www.pololu.com
63
* http://www.sparkfun.com
64
* http://www.farnell.com/ (also can be gotten from http://www.mbr.is/)