Final Project Ordering » History » Version 26
Elías Marel Þorsteinsson, 2012-10-21 16:40
Updated the list, our group is ready
1 | 1 | Joseph Foley | h1. Final Project Ordering |
---|---|---|---|
2 | |||
3 | Remember to specify if you are keeping the parts later or not. RU will pay for some parts, but nothing expensive, especially if you are keeping it. We can probably afford around $50 per group, roughly. Make sure that you follow the template shown below or you may not get your parts ordered. This list must be completed by Thursday Oct 18. |
||
4 | |||
5 | 3 | Joseph Foley | Try to order from the recommended vendors first. If the thing you need is not there, then make sure you include shipping and tax in the cost information, e.g. 25Euro + 15Euro(ship) + 10Euro(tax). |
6 | |||
7 | 1 | Joseph Foley | h2. Groups |
8 | |||
9 | 22 | Joseph Foley | h3. Example |
10 | 20 | Joseph Foley | |
11 | 22 | Joseph Foley | * Joe Foley and Bjorgvin Runarsson "Lab5 and Lab6 Supplies" |
12 | 1 | Joseph Foley | ** Emails: foley@ru.is, bjorgvin09@ru.is |
13 | 22 | Joseph Foley | ** RU is paying for it out of the class budget |
14 | 24 | Joseph Foley | ** 15 of IR distance sensor includes cable (10cm-80cm) - GP2Y0A21YK0F $13.95 each http://adafruit.com/products/164 |
15 | *** We appear to have 8 of them in the equipment box, so we only need to order 7 |
||
16 | 2 | Joseph Foley | |
17 | 20 | Joseph Foley | h3. Projects |
18 | |||
19 | 26 | Elías Marel Þorsteinsson | * Axel Bender, Elías Marel and Ívar Kristinsson "Auto Targeting Nerf Turret" |
20 | 4 | Elías Marel Þorsteinsson | ** Emails: axelb10@ru.is, elias10@ru.is, ivark10@ru.is |
21 | ** We plan on keeping the robot, so we will pay for the materials later. |
||
22 | 5 | Elías Marel Þorsteinsson | ** 1 of Pololu Qik 2s9v1 Dual Serial Motor Controller $24.95 http://www.pololu.com/catalog/product/1110 |
23 | 26 | Elías Marel Þorsteinsson | ** 5 of PIR motion sensor, IE:189 $10.00 https://www.adafruit.com/products/189 |
24 | 11 | Joseph Foley | * Guðjón Einar, Ægir Örn, Jon Vilberg "Head-tracking camera mount" |
25 | 12 | Joseph Foley | ** Emails: gudjonm11@ru.is, aegiri11@ru.is, jonvg09@ru.is |
26 | 6 | Gudjon Magnusson | ** We plan on keeping the XBee modules and will pay for them |
27 | ** 1 of Servo - Large Full Rotation $13.95 https://www.sparkfun.com/products/9347 |
||
28 | ** 2 of Standard servo - TowerPro SG-5010 - 5010 $12.00 https://www.adafruit.com/products/155 |
||
29 | 16 | Gudjon Magnusson | ** 1 of L3GD20 3-Axis Gyro Carrier with Voltage Regulator $24.95 http://www.pololu.com/catalog/product/2125 |
30 | 17 | Gudjon Magnusson | ** 1 of Rechargeable NiMH Battery Pack: 7.2 V, 2200 mAh, 3x2 AA Cells, JR Connector $17.29 http://www.pololu.com/catalog/product/2225 |
31 | 6 | Gudjon Magnusson | ** 1 of Compass Module - HMC6352 $34.95 https://www.sparkfun.com/products/7915 |
32 | ** 2 of XBee Pro 60mW Wire Antenna - Series 1(802.15.4) $37.95 https://www.sparkfun.com/products/8742 |
||
33 | 10 | Árni Þorvaldsson | * Árni Þorvaldsson, Hannes Rúnar Herbertsson, Emil Már Einarsson, Brynjólfur Guðmundsson, Sæþór Ólafur Pétursson and Örn Bárður Arnarson "Quadcopter" |
34 | ** Emails: arnitho10@ru.is, hannesh08@ru.is, saethor10@ru.is, emil11@ru.is, orn10@ru.is, brynjolfur06@ru.is |
||
35 | ** We will split into two groups and make each one quadcopter. |
||
36 | 25 | Árni Þorvaldsson | ** We have fundings from the University to pay for the material and will order it ourselves. |
37 | 9 | Árni Þorvaldsson | ** 10x Motor AC2836-358, 880Kv $240.00 http://store.jdrones.com/AC2836_358_Motors_p/ac2836358.htm |
38 | ** 10xArduCopter ESC 20 Amp (BACKORDER) $144 http://store.diydrones.com/ArduCopter_ESC_20_Amp_p/ac-0004-08.htm |
||
39 | ** APC Propeller set, 11X47 SFP Style $48 http://store.diydrones.com/APC_Propeller_set_11X47_SFP_Style_p/ac-0004-apc2.htm |
||
40 | ** Full ArduPilot Mega 2 kit $300 http://store.diydrones.com/ArduPilot_Mega_kit_p/kt-apm-01.htm |
||
41 | ** Optical Flow Sensor $79.98 |
||
42 | 8 | Árni Þorvaldsson | ** 2xTurnigy carbon frame 67.90 http://www.hobbyking.com/hobbyking/store/__22397__Turnigy_Talon_Carbon_Fiber_Quadcopter_Frame.html |
43 | 13 | Joseph Foley | ** 2x Turnigy 2200mAh 3S 25C lipo pack $18 http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8934 |
44 | * Sturla Rúnarsson "Locking system, Safe" |
||
45 | ** sturla06@ru.is |
||
46 | ** Need nothing |
||
47 | 14 | Joseph Foley | * Víðir Bjarkason and Arndís Magnúsdóttir "Motor driven car that hunts for light" |
48 | ** vidirb07@ru.is, arndis10@ru.is |
||
49 | ** Light sensors (from the lab) |
||
50 | ** DC motors |
||
51 | 1 | Joseph Foley | ** DC motor control (or transistor) |
52 | * Konráð Guðmundsson, Ingi Steinn Guðmundsson, Guðjón Ingi Gunnlaugsson and Gunnar Sigurðsson "Map Maker" |
||
53 | ** konrad11@ru.is, ingi10@ru.is, gudjon11@ru.is and gunnar11@ru.is |
||
54 | 23 | Konráð Guðmundsson | ** 3x Ultrasonic sensors for forward/right/left sides of the robot, used for mapping: Ultrasonic Range Finder - Maxbotix LV-EZ1 (https://www.sparkfun.com/products/639) |
55 | ** 1x Network capability for the Arduino (Network Shield for wireless connect): Arduino Wi-Fi Shield (https://www.sparkfun.com/products/11287?) |
||
56 | 20 | Joseph Foley | * Gisli "Line following car" |
57 | ** gisli??@ru.is |
||
58 | ** Need nothing |
||
59 | 14 | Joseph Foley | |
60 | 2 | Joseph Foley | h2. Recommended vendors |
61 | |||
62 | * http://www.adafruit.com |
||
63 | * http://www.pololu.com |
||
64 | * http://www.sparkfun.com |
||
65 | * http://www.farnell.com/ (also can be gotten from http://www.mbr.is/) |