Final Project Ordering » History » Revision 20
Revision 19 (Gudjon Magnusson, 2012-10-18 16:51) → Revision 20/67 (Joseph Foley, 2012-10-19 11:24)
h1. Final Project Ordering Remember to specify if you are keeping the parts later or not. RU will pay for some parts, but nothing expensive, especially if you are keeping it. We can probably afford around $50 per group, roughly. Make sure that you follow the template shown below or you may not get your parts ordered. This list must be completed by Thursday Oct 18. Try to order from the recommended vendors first. If the thing you need is not there, then make sure you include shipping and tax in the cost information, e.g. 25Euro + 15Euro(ship) + 10Euro(tax). h2. Groups h3. Example template * Joe Foley and Bjorgvin Runarsson "Roomba Missile Defense System" ** Emails: foley@ru.is, bjorgvin09@ru.is ** We plan on keeping the robot, so we will pay for the materials later. ** 1 of Emic 2 Text-to-Speech module $59.95 http://www.adafruit.com/products/924 ** 1 of Pololu Qik 2s9v1 Dual Serial Motor Controller $24.95 http://www.pololu.com/catalog/product/1110 ** 2 of Breakout Board for AD5330 Parallel 8-Bit DAC $9.95 https://www.sparkfun.com/products/9719 h3. Projects * Axel Bender, Elías Marel and Ívar Kristinsson "Auto-Targeting Ping-Pong Ball Turret" ** Emails: axelb10@ru.is, elias10@ru.is, ivark10@ru.is ** We plan on keeping the robot, so we will pay for the materials later. ** 1 of Pololu Qik 2s9v1 Dual Serial Motor Controller $24.95 http://www.pololu.com/catalog/product/1110 ** 1 Motion sensor (capable of sensing movement and where it is, yet to be found) ** 1 Distance sensor (laser or infrared, up to 2-3 m range, yet to be found) * Guðjón Einar, Ægir Örn, Jon Vilberg "Head-tracking camera mount" ** Emails: gudjonm11@ru.is, aegiri11@ru.is, jonvg09@ru.is ** We plan on keeping the XBee modules and will pay for them ** 1 of Servo - Large Full Rotation $13.95 https://www.sparkfun.com/products/9347 ** 2 of Standard servo - TowerPro SG-5010 - 5010 $12.00 https://www.adafruit.com/products/155 ** 1 of L3GD20 3-Axis Gyro Carrier with Voltage Regulator $24.95 http://www.pololu.com/catalog/product/2125 ** 1 of Rechargeable NiMH Battery Pack: 7.2 V, 2200 mAh, 3x2 AA Cells, JR Connector $17.29 http://www.pololu.com/catalog/product/2225 ** 1 of Compass Module - HMC6352 $34.95 https://www.sparkfun.com/products/7915 ** 2 of XBee Pro 60mW Wire Antenna - Series 1(802.15.4) $37.95 https://www.sparkfun.com/products/8742 * Árni Þorvaldsson, Hannes Rúnar Herbertsson, Emil Már Einarsson, Brynjólfur Guðmundsson, Sæþór Ólafur Pétursson and Örn Bárður Arnarson "Quadcopter" ** Emails: arnitho10@ru.is, hannesh08@ru.is, saethor10@ru.is, emil11@ru.is, orn10@ru.is, brynjolfur06@ru.is ** We will split into two groups and make each one quadcopter. ** We have fundings from the University to pay for the material. ** 10x Motor AC2836-358, 880Kv $240.00 http://store.jdrones.com/AC2836_358_Motors_p/ac2836358.htm ** 10xArduCopter ESC 20 Amp (BACKORDER) $144 http://store.diydrones.com/ArduCopter_ESC_20_Amp_p/ac-0004-08.htm ** APC Propeller set, 11X47 SFP Style $48 http://store.diydrones.com/APC_Propeller_set_11X47_SFP_Style_p/ac-0004-apc2.htm ** Full ArduPilot Mega 2 kit $300 http://store.diydrones.com/ArduPilot_Mega_kit_p/kt-apm-01.htm ** Optical Flow Sensor $79.98 ** 2xTurnigy carbon frame 67.90 http://www.hobbyking.com/hobbyking/store/__22397__Turnigy_Talon_Carbon_Fiber_Quadcopter_Frame.html ** 2x Turnigy 2200mAh 3S 25C lipo pack $18 http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8934 * Sturla Rúnarsson "Locking system, Safe" ** sturla06@ru.is ** Need nothing * Víðir Bjarkason and Arndís Magnúsdóttir "Motor driven car that hunts for light" ** vidirb07@ru.is, arndis10@ru.is ** Light sensors (from the lab) ** DC motors ** DC motor control (or transistor) * Konráð Guðmundsson, Ingi Steinn Guðmundsson, Guðjón Ingi Gunnlaugsson and Gunnar Sigurðsson "Map Maker" ** konrad11@ru.is, ingi10@ru.is, gudjon11@ru.is and gunnar11@ru.is ** Ultrasonic sensors for forward/right/left sides of the robot, used for mapping. ** Network capability for the Arduino (Network Shield for wireless connect) * Gisli "Line following car" ** gisli??@ru.is ** Need nothing h2. Recommended vendors * http://www.adafruit.com * http://www.pololu.com * http://www.sparkfun.com * http://www.farnell.com/ (also can be gotten from http://www.mbr.is/)