Cad Files and number system » History » Version 4
Halldór Þorkelsson, 2012-02-02 10:59
Added all my parts i've created
| 1 | 1 | Halldór Þorkelsson | h1. Cad Files and number system |
|---|---|---|---|
| 2 | |||
| 3 | 3 | Halldór Þorkelsson | The procedure when making a new part/assembly is the following: you check the wiki for what part number is active then you add your new part to the system under one of the category on the wiki then add a description to the part, save the changes to the wiki. This way we can probably keep the numbers in order and avoid conflicting numbers in Subversion. |
| 4 | |||
| 5 | |||
| 6 | 1 | Halldór Þorkelsson | Part: |
| 7 | 4 | Halldór Þorkelsson | 4001-H01 Leg component f. Hip joint idea 1 (does not work) |
| 8 | 4002-H01 Motor arm f. Hip Joint idea 1 (does not work) |
||
| 9 | 4003-H01 Motor arm f. Hip joint idea 1 (does not work) |
||
| 10 | 4004-H01 Base 3d sketch f. agile eye hip joint idea |
||
| 11 | 4005-H01 Outer rotating arm f. agile eye |
||
| 12 | 4006-H01 second rotating arm f. agile eye |
||
| 13 | 4007-H01 Inner rotating arm f. agile eye |
||
| 14 | 4008-H01 base f. agile eye |
||
| 15 | 4009-H01 leg piece f. agile eye |
||
| 16 | 4010-H01 Top piece f. International joint type idea |
||
| 17 | 4011-H01 1.st piece f. international joint type idea |
||
| 18 | 4012-H01 middle piece f. international joint type idea |
||
| 19 | 4013-H01 bottom piece f. international joint type idea. |
||
| 20 | 1 | Halldór Þorkelsson | |
| 21 | 4 | Halldór Þorkelsson | |
| 22 | |||
| 23 | 1 | Halldór Þorkelsson | Module: |
| 24 | 4 | Halldór Þorkelsson | 1001-H01 Hip joint idea 1 (does not work) 2 dof parallel manipulator. |
| 25 | 1002-H01 Agile eye rough model. |
||
| 26 | 1003-H01 International Joint f. hip rough model. |
||
| 27 | 1 | Halldór Þorkelsson | |
| 28 | Weldment: |
||
| 29 | |||
| 30 | Raw material: |
||
| 31 | 2 | Halldór Þorkelsson | |
| 32 | Product: |